The Leica Lino ML90 has two vertical and one horizontal laser line as well as a plumb beam. It can be quickly and easily set-up and aligned manually and has a fine adjustment range of ± 4°. Its primary function is setting out right angles.

Battery Life

The Leica Lino ML90 can be used with a rechargeable battery pack or alkaline batteries. This provides maximum flexibility and ensures that the Leica Lino ML90 is always ready for use. The tool can also be used while being charged.

Precise layouts at long distances

The electronic self-levelling automatically compensates for the tool being slightly out of level.

Plumb dot positioning

Using the plumb dot, you can set up the Leica Lino over a desired point. The plumb beam is offset to the corner of the tool. So the Leica Lino ML180 can be quickly and easily set up over markings, including those close to walls.

Receiver Compatible

The ML90 is compatible with the RVL100 receiver. (RVL100 sold separately)

Unlike the ML180, the ML90 cannot be adjusted remotely.


Features and Functions

90 degree Cross Line Laser Function Icon 90° Cross Line Laser

Engage both the vertical and horizontal beams to project a perfect 90° intersection in front of the device. 

Ideal for laying tile on walls or floors, for laying out grids for a drop ceiling, or any other task that requires a 90° referrence.

Laser Receiver Compatible Icon Laser Receiver Compatible

Using an RVL 100 laser receiver with your line laser doubles your range. The RVL 100 works on the same basic principle as the receivers that work with rotating lasers intended for outdoor use. We also carry the RVL80 laser receiver

Level Horizontal Line Function Icon Level Horizontal Line
Plumb Vertical Line Function Icon Plumb Vertical Line
Rechargeable Battery (NiMH) Icon Rechargeable Battery (NiMH)

Up to 7 hours of continuous use with both beams on.

Self Leveling Auto Level Icon Self Leveling

For Lino products, the precise leveling pendulum will level and plumb lines when the housing is tilted up to 4° 

For the 3D DISTO, self-leveling within range of ±3°

Set Out Right Angles Icon Set Out Right Angles

Lino's with both vertical and horizontal point lasers can be positioned to set perfect 90 degree angles.



Operation range * (with receiver at the center of the line) up to 100 m / 328 ft
Self leveling accuracy (@25°C/77°F) 0.7 mm @10 m / 1/32 inch @30 ft
Self-levelling range +/- 5°
Self leveling time < 10 sec.
Angular accuracy 0.2 mm/m
Laser diode type 635 nm, laser class 2
Fan angle 120°
Protection IP54
Operation temperature -10 - +45°C / 14°F - +113°F
Storage temperature -25 - +70°C / -13°F - +158°F
Battery type Type D, 2 x 1,5V
Average battery operation time alkaline / NiMH 20 hrs (Alkaline) 16 hrs (rechargeable)
Dimensions 250 x 159 x 230 mm / 9.9 x 6.3 x 9.1 inch
Weight with batteries 2200 g / 77 oz