• L2+_FRONT_freeship.final
  • Leica LINO L2+
  • Leica LINO L2+ Scope of Delivery
  • Leica LINO L2+ with Adapter
  • Leica LINO L2+ Adapter
  • Leica LINO L2+ Red Laser Target Plate

The Leica L2+ is a cross line laser level with a dual fan angle of 180˚. 

The 180˚ angle allows you put the tool in a corner to layout the whole room.

Use the horizontal and vertical lines together to produce a perfect 90˚ cross line, or toggle between vertical only and horizontal only depending on the application.

The L2+ has a 50' range.

The L2+ self leveling pendulum lets you know your line is out of level by blinking. Once level, the line goes solid. Lock the pendulum to set out angled lines and to protect the mechanism when you aren't using it.

The lasers and pendulum are housed in a rugged job site ready body. It is IP54 rated dust-proof and splash protected.    



Rangeup to 50 ft depending on lighting conditions
Range with detector> 100 ft
Levelling accuracy @ 16 ft± 1/16"
Self-levelling range4° ± 0.5°
Accuracy of horizontal line @ 16 ft± 1/16"
Vertical accuracy @ 10 ftline length± 1/32"
Number of laser lines2
Beam directionvertical, horizontal
Laser type635 nm, laser class II
Batteriestype AA 3 × 1.5 V
Protection class splash water / dust proofIP54 splash water/ dust proof
Operating temperature14°F to 104°F
Storage temperature-13°F to 158°F
Dimensions (H × D × W)4.6 x 5.1 x 3.0 in
Weight without batteries13 oz
Tripod thread¼”- 20
  • The same engineers who design and spec the most technologically advanced Total Stations and Laser Scanners on the planet also design and spec our laser levels.

    The LINO self-leveling pendulum is no exception. We use high-grade, precision bearings to ensure that your lines float to level within 1/16th of an inch, or less, 16ft (5m) from the device.


  • The fan angle on a line laser determines the coverage the tool provides from a given point. The higher the fan angle, the fewer times you have to reset the tool throughout the course of a job.

  • Engage both the vertical and horizontal beams to project a perfect 90° intersection in front of the device. 

    Ideal for laying tile on walls or floors, for laying out grids for a drop ceiling, or any other task that requires a 90° referrence.

  • "IP" stands for Ingress Protection. 

    The Ingress Protection (IP) rating was developed by the European Committee for Electrotechnical Standardization (CENELEC) to create a standard of toughness for electronic devices: Higher numbers mean more resistance to dust and water.

    For more information on IP ratings, see the IP section on the Certification page.

  • Using an RVL 100 laser receiver with your line laser doubles your range. The RVL 100 works on the same basic principle as the receivers that work with rotating lasers intended for outdoor use. 

  • You can lock out the self-leveling pendulum to shoot an angled line of up to 45°. 

    Its also a good idea to use the lock to secure the pendulum when you are not using the tool so that it isn't banging around (just make sure you unlock it the next time you need a level line).

  • The precise leveling pendulum will level and plumb lines when the housing is tilted up to 4°