• disto_d510_free_shipping
  • Leica DISTO™ E7500i Display
  • Leica DISTO™ E7500i Intelligent Endpiece
  • Leica DISTO™ E7500i Front Left
  • Leica DISTO™ E7500i Scope of Delivery
  • Leica DISTO™ E7500i Front
  • Leica DISTO™ E7500i Showing Optics
  • Leica DISTO™ E7500i Keypad

The Leica DISTO™ D510 is a 14 measurement mode LDM that is accurate to 1/16th of an inch. It is IP65 rated against dust, dirt and rain and features an integrated digital camera, a sunlight-visible LCD screen, 360° tilt sensor, and Bluetooth Smart. 

With a 600'-plus range, the D510 can shoot a target at distances that exceed your ability to see the laser dot, especially outside. The point finder -- a 4x zoom digital camera with crosshairs on the LCD display -- solves this problem.

The farther you can shoot, the more potential there is for something to get in the way. Smart Horizontal allows you to shoot over obstacles so you can measure the level horizontal distance to your target. 

At distance, even a small wobble in the tool translates to the laser point bouncing in wide arcs on your target . For best results when measuring long distances, keep your dot steady with a tripod and Leica's patented Fine Tune Adapter.

How to use the D510

Specifications

ISO 16331-1 certified typical measuring accuracy± 0.04 in
ISO 16331-1 certified typical rangeup to 660 ft
Measuring units0.000 m, 0.0000 m, 0.00 m, 0.00 ft, 0'00" 1/32, 0.00 in, 0 in 1/32
Power Range Technology™Yes
Distance in m10, 50, 100 m
Ø of the laser dot in mm6, 30, 60 mm
Tilt sensor measuring range360°
Pointfinder with 4x zoomYes
MemoryLast 30 displays
Free AppYes
Data interface*Bluetooth® V4.0 Smart
Measurements per set of batteriesup to 5000 (with Li-iron LFP batteries)
Multifunctional end-pieceAutomatic recognition
Batteriestype AA 2 × 1.5 V (Ships with Li-ion rechargeable)
Tripod thread¼”- 20
Protection classIP65 – water jet protection and dust-tight
Dimensions5.6 x 2.3 x 1.1 in
EAN/UPC7640110694237
  • Functions that need to know the angle of the DISTO when the shot is taken are enabled by a highly accurate 360° tilt sensor that determines the angle of the laser. These include Smart Horizontal and Height Tracking modes.

  • Pointfinder

    The onboard digital camera features a 4x digital zoom "point finder" that shows you where the dot is even if you can't see it with the naked eye. Put the crosshairs on the spot you are measuring to and hit the button. It's that simple.

  • That's right: A sixteenth of an inch. Take out a pair of earbuds. Look at how wide the the 1/8" jack is. Now divide that by half.

  • It's not always so simple as taking one shot to get the measurement you need. Sometimes its handy to add multiple shots together, or subtract a negative space from a measurement.

    As you use the Add/Subtract function, the final result is displayed in the main line, and the last measurement taken is shown above.

  • Area / Volume

    In area mode, the DISTO determines the area of a rectangle or square in two shots.

    Volume mode adds a third vertical shot to calculate volume.

  • Yard

    Send measurements directly to your apps using Bluetooth Smart.

    See our App Directory for a list of apps that all kinds of professionals are using to transform the way they work.

    See our blog for more information about device compatibility.

     

     

    The free Leica DISTO Sketch App lets you take a picture with your iPhone and layer measured lines on top of it.

  • Bluetooth DISTOs are useful for Building Information Modeling (BIM).

    For more information on how Leica Geosystems supports BIM across our product line, check out the BIM Field Trip on our corporate site.

  •  

     

    Measure slopes with multiple shots. Each shot is stored as a profile pair that references the step before it.

  •  

     

     

     

    "Real time" height tracking for situations where you can hit a reflective target (like the ground) on the low end, but not at the top. Perfect for measuring the height of an overhead wire, for example.

  • Intelligent Endpiece

    The endpiece is an integral part of the tool, connected to the circuit board.

    In the closed position the DISTO knows to measure from its base.

    Flip it open 90 degrees to align the base perfectly on an edge or corner.

    Flip it out all the way and you can put this baby in a corner to accurately measure diagonals. Otherwise, the width of the base would prevent you from getting aII the way into the corner, rendering the measurement inaccurate.

  • Store measurements and images with measurements associated with them.

  • Min / Max Function

    In Min/Max mode, you "sweep" the laser point into a corner. The longest measurement is recorded. Very useful for accurate diagonal room or window/door measurements.

  • Painter Function

    When the DISTO is in area or volume mode, you can use the add / subtract function to total up the area of several surfaces, or subtract an area, like a door for example, from a measurement.

  • Personalize Favorites

     

    With over 20 functions, chances are you are going to use one or two more than the rest. This Favourites function lets you bookmark your most-used functions on the tabs at the bottom of the touch screen.

  • Two Point Pythagoras

    Take indirect height and width measurements using the Pythagorean Theorem.

    Three Point Pythagoras

    The key is to make sure your second shot -- the "rectangular shot" -- is perpendicular to the point you are measuring, shown as the 90° angle in the images. The best way to ensure accuracy is to use a tripod and an adapter.

  • Lecia DISTO

    The big receiver lens and the module it is connected to can see a laser dot outside at distances of over 600 ft, depending on conditions.

  •  

     

    Indirect distance measuring between two points. The reported measurements also include the horizontal distance between the two points, the vertical distance between the two points, and the angle between the points.

  • Smart Horizontal Mode

    Use Smart Horizontal to determine the level horizontal distance to a target when you have to shoot over an obstacle. The onboard 360° tilt sensor provides an angle measurement so the software can do the math to figure out how much to subtract from the angled shot to get the actual horizontal distance.

  • Stake Out Function

    The stake out function uses the continuous measurement mode to indicate where to place stakes along a stake-out line. Ideal for any situation where you need to place objects at a consistent interval. The display shows the distance to the next stake out point and the DISTO beeps as you approach it.

  • Set a timer to delay a measurement the same way you would with the shutter on a digital camera.

  • Trapezium Function

    The Trapezium Function is useful for determining the length and slope of a roof section, and the area it covers. The DISTO uses the its internal tilt sensor to calculate the angle and the distance between the shots, which means you can measure roofs accurately from the ground.

  • Triangle / Room

    The simple area function is great when a room is a square or rectangle, but what if you have to determine the area of a room that has more than four corners? That is where the triangle function comes in. Divide the room into imaginary triangles, take three shots for each and then add them up. The DISTO will also tell you circumfrence and the angle of the triangle.

E7500i Introduction

ToolSelect.com may be gone, but all of their tool reviews still live on the ToolSelect YouTube channel.

Here, we introduced Barnaby to the E7500i.