• Leica DISTO D2 New Scope of Delivery
  • Leica DISTO D2 New Front Left View
  • Leica DISTO D2 New Front View
  • Leica DISTO D2 New Front Right View
  • Leica DISTO D2 Keypad View
  • Leica DISTO D2 Top Lense View
  • Leica DISTO D2 New Side View
  • Leica DISTO D2 New Intelligent Endpiece Extended
  • Leica DISTO D2 New Intelligent Endpiece in Action
  • Leica DISTO D2 New Nylon Holster
  • Leica DISTO D2 New In Hand

Our newest take on the classic Leica DISTO™ D2.

Now with Bluetooth™, a fully integrated intelligent endpiece, a bright white display and an ISO certified measuring engine that drives 1,5 mm accuracy and 100 m measuring range.

The Leica DISTO™ D2 is a 7 measurement mode LDM accurate to 1,5 of a millimeter. It features an intuitive back-lit LCD display in a 114 g package that is small enough to fit in your pocket.

Use Bluetooth™ to send measurements into apps running on mobile devices.

The D2 measures from its base by default and can be configured to measure from the front. 

Flip out the intelligent endpiece to 90º to hook onto outside corners or extend the endpiece fully for inside corners. The D2 will automatically measure from the end of its flip-out endpiece when fully extended. Combined with the Min/Max function, the endpiece allows you to get the tool all the way into corners for accurate diagonal measurements as shown in this Intelligent Endpiece video

The D2 calculates area and volume, and remembers the last 10 measurements taken. Use the Add/Subtract capability to combine measurements to get a precise reading of the total wall area of a room (aka "the painter function").

The D2 includes a Pythagoras function for indirect height or width measurements. However, in a tool this size that cannot be mounted to a tripod we recommend using the Pythagoras for estimates or rough measurements. If you need precise indirect measurements, an LDM with a tilt sensor is your best bet.

For more information on the features and functions of the D2 check out the clickable icon grid below.

How to use the D2


Typical measuring accuracy±1.5 mm
ISO 16331-1 certified Rangeup to 100 m
Measuring units0.000 m, 0.00 ft, 0'00" 1/16, 0 in 1/16
MemoryLast 10 values
Data InterfaceBluetooth Smart V4.0
Measurements per set of batteriesup to 10000
Multifunctional end-pieceYes, intelligent recognition
Batteries2x AAA 1.5 V (Ships with alkaline)
Display3 line display with illumination
Protection classIP54, dust-proof, splash-proof
Dimensions116 x 44 x 26 mm
Weight with batteries100 g / 3.53 oz
Minimum / maximum measurementsYes
Area / volume calculationYes
Pythagoras functions2 points, 3 points
Stake-out functionYes, single value
Painter functionYes
Subtraction / additionYes
Timer functionYes, variable
BeepYes, switchable on/off
Operating temperature range-10°C to 50°C
Storage temperature range-25°C to 70°C
  • It's not always so simple as taking one shot to get the measurement you need. Sometimes its handy to add multiple shots together, or subtract a negative space from a measurement.

    As you use the Add/Subtract function, the final result is displayed in the main line, and the last measurement taken is shown above.

  • Area / Volume

    In area mode, the DISTO determines the area of a rectangle or square in two shots.

    Volume mode adds a third vertical shot to calculate volume.

  • Yard

    Send measurements directly to your apps using Bluetooth Smart.

    See our App Directory for a list of apps that all kinds of professionals are using to transform the way they work.

    See our blog for more information about device compatibility.



    The free Leica DISTO Sketch App lets you take a picture with your iPhone and layer measured lines on top of it.

  • Intelligent Endpiece

    The endpiece is an integral part of the tool, connected to the circuit board.

    In the closed position the DISTO knows to measure from its base.

    Flip it open 90 degrees to align the base perfectly on an edge or corner.

    Flip it out all the way and you can put this baby in a corner to accurately measure diagonals. Otherwise, the width of the base would prevent you from getting aII the way into the corner, rendering the measurement inaccurate.

  • "IP" stands for Ingress Protection. 

    The Ingress Protection (IP) rating was developed by the European Committee for Electrotechnical Standardization (CENELEC) to create a standard of toughness for electronic devices: Higher numbers mean more resistance to dust and water.

    For more information on IP ratings, see the IP section on the Certification page.

  • Min / Max Function

    In Min/Max mode, you "sweep" the laser point into a corner. The longest measurement is recorded. Very useful for accurate diagonal room or window/door measurements.

  • Painter Function

    When the DISTO is in area or volume mode, you can use the add / subtract function to total up the area of several surfaces, or subtract an area, like a door for example, from a measurement.

  • Two Point Pythagoras

    Take indirect height and width measurements using the Pythagorean Theorem.

    Three Point Pythagoras

    The key is to make sure your second shot -- the "rectangular shot" -- is perpendicular to the point you are measuring, shown as the 90° angle in the images. The best way to ensure accuracy is to use a tripod and an adapter.

  • Stake Out Function

    The stake out function uses the continuous measurement mode to indicate where to place stakes along a stake-out line. Ideal for any situation where you need to place objects at a consistent interval. The display shows the distance to the next stake out point and the DISTO beeps as you approach it.