The Leica Lino L4P1 is a new, all-in-one 180° multi-line laser layout tool designed to handle jobs that have traditionally required both a line laser and a point laser.

The new base of this laser level is designed for fast setups. Just grab and spin the unit on its base to get close, then use the fine-tune knob to adjust the line or cross point for perfect placement.  

Combined with an overhead plumb laser point, the intersections of the three 180° vertical laser lines with the horizontal laser line create a total of five layout points for easy alignment and quick height transfers from wall-to-wall or floor-to-ceiling.

The self-leveling pendulum ensures a level line. You know your line is out of level when it blinks. If the points are out of leveling range, they shut off. Once level, the line goes solid or the dot appears. Lock the pendulum to set out angled lines or to protect the mechanism when you aren't using it.

The L4P1 runs on both rechargable Li-Ion batteries -- good for up to 24 hours on a single charge -- as well as standard alkaline batteries.

As with all our laser levels, the L4P1 is IP54 rated dust-proof and splash protected. 

The four cross line lasers make this the ultimate 90º layout tool, perfect for wood or steel stud construction, point transfer for electrical installations, interior finish work and various other trade applications.

We recommend a tripod for maximum versatility like the TRI70. The L4P1 base mounts to either 1/8" or 5/8" tripod threads, so you can use a tripod you already have, or choose a Leica Geosystems tripod that best suits your needs. The L4P1 is also compatible with our RGR 200 laser reciever, which extends the working range of the multi-line laser up to 80m.

Features and Functions

180 degree Fan Angle Icon 180° Fan Angle

The fan angle on a line laser determines the coverage the tool provides from a given point. The higher the fan angle, the fewer times you have to reset the tool throughout the course of a job.

Self Leveling Auto Level Icon Self Leveling


For Lino products, the precise leveling pendulum will level and plumb lines when the housing is tilted up to 4° 

For the 3D DISTO, self-leveling within range of ±3°


Level Horizontal Line Function Icon Level Horizontal Line
Plumb Vertical Line Function Icon Plumb Vertical Line
90 degree Cross Line Laser Function Icon 90° Cross Line Laser

Engage both the vertical and horizontal beams to project a perfect 90° intersection in front of the device. 

Ideal for laying tile on walls or floors, for laying out grids for a drop ceiling, or any other task that requires a 90° referrence.

Pendulum Lock Function Icon Pendulum Lock

You can lock out the self-leveling pendulum to shoot an angled line of up to 45°. 

Its also a good idea to use the lock to secure the pendulum when you are not using the tool so that it isn't banging around (just make sure you unlock it the next time you need a level line).

Laser Receiver Compatible Icon Laser Receiver Compatible

Using an RVL 100 laser receiver with your line laser doubles your range. The RVL 100 works on the same basic principle as the receivers that work with rotating lasers intended for outdoor use. We also carry the RVL80 laser receiver

Square Function Icon Square

The crossline level gives you horizontal and vertical level lines at the same time. You also get a perfect 90˚.

Set Out Right Angles Icon Set Out Right Angles

Lino's with both vertical and horizontal point lasers can be positioned to set perfect 90 degree angles.


Rechargeable Li-Ion Battery Icon Rechargeable Battery

This DISTO™ will take approximately 4000 measurments per charge. The 3D Disto will typically last a full working day of 8 hours.

IP54 Icon IP54

"IP" stands for Ingress Protection. 

The Ingress Protection (IP) rating was developed by the European Committee for Electrotechnical Standardization (CENELEC) to create a standard of toughness for electronic devices: Higher numbers mean more resistance to dust and water.

For more information on IP ratings, see the IP section on the Certification page.


Range 15 m 
Range with laser receiver 80 m 
Accuracy 2mm at 10m 
Self-levelling range +/- 3°
No. of laser lines 4
No. of laser dots 1
Beam directions Vertical, horizontal
Laser type: Laser Class 2, IEC60825-1:2014 compliance 620 - 690 nm
Battery types Rechargeable Li-Ion batteries or Alkaline batteries 4xAA, 1.5V
Battery life Li-Ion batteries 24 hours
Protection level IP 54
Tripod thread 1/4"-20, 5/8"-11
Operating temperature -10°C - 50°C 
Storage temperature -25°C - 70°C 
Dimensions 125 x 125 x 162 mm 
Weight (with Li-Ion batteries) 1.17 kg | 41.27oz
EAN/UPC 7640110696040