The Leica DISTO™ E7300 is a 7 measurement mode LDM that is accurate to 1/16th of an inch. It features a backlit LCD display and an intelligent end piece. At just under 4 1/2 inches tall and weighing in at 4 1/2 ounces with batteries, the E7300 is rugged yet compact enough to keep handy, making it an ideal LDM for finish carpenters or interior designers. 

Measuring the diagonal distance of rough openings with a tape -- getting it to bend  just the right way to get both ends all the way into the corners - is a chore.  Measuring large openings is just a straight-up two-person job. The E7300 eliminates these hassles and makes it easy for one person to get accurate diagonals, regardless of distance, using its intelligent end piece and min/max mode.

The average accuracy for a DISTO is 1/16th of an inch. Your mileage may vary -- the individual certificate that ships with each DISTO will tell you by how much -- but if you're banging out studs with a chop saw blade that has a 1/8" kerf, you probably don't need your DISTO showing measurements down to a 16th or a 32nd. The E7300 has 13 unit of measure display modes, from thousandths of a millimeter to a 1/4 of an inch, so you can dial in the level of accuracy you need for the job at hand.

The E7300 can calculate area, volume and remote height or width using the Pythagorean function. The E7300 saves the last 10 screens, so you can use the add/subtract function to fine tune measurements or combine them to get your total area.

For more information on the features and functions of the D510 check out the clickable icon grid below.

Features and Functions

Accurate to 1/16 of an inch Icon Accurate to 1/16 of an inch

That's right: A sixteenth of an inch. Take out a pair of earbuds. Look at how wide the the 1/8" jack is. Now divide that by half.

Add & Subtract Icon Add & Subtract

It's not always so simple as taking one shot to get the measurement you need. Sometimes its handy to add multiple shots together, or subtract a negative space from a measurement.

As you use the Add/Subtract function, the final result is displayed in the main line, and the last measurement taken is shown above.

Area / Volume Icon Area / Volume

Area / Volume

In area mode, the DISTO™ determines the area of a rectangle or square in two shots.

Volume mode adds a third vertical shot to calculate volume.

Add & Subtract Icon Intelligent Endpiece

Intelligent Endpiece

The endpiece is an integral part of the tool, connected to the circuit board.

In the closed position the DISTO™ knows to measure from its base.

Flip it open 90 degrees to align the base perfectly on an edge or corner.

Flip it out all the way and you can put this baby in a corner to accurately measure diagonals. Otherwise, the width of the base would prevent you from getting all the way into the corner, rendering the measurement inaccurate.

Memory Stores 30 Displays Icon Memory stores 30 Displays

Store measurements and images with measurements associated with them.

Min / Max Function Icon Min / Max Function

Min / Max Function

In Min/Max mode, you "sweep" the laser point into a corner. The longest measurement is recorded. Very useful for accurate diagonal room or window/door measurements.

Painter Function Icon Painter Function

Painter Function

When the DISTO™ is in area or volume mode, you can use the add / subtract function to total up the area of several surfaces, or subtract an area, like a door for example, from a measurement.

Pythagoras Function Icon Pythagoras Function

Two Point Pythagoras

Take indirect height and width measurements using the Pythagorean Theorem.

Three Point Pythagoras

The key is to make sure your second shot -- the "rectangular shot" -- is perpendicular to the point you are measuring, shown as the 90° angle in the images. The best way to ensure accuracy is to use a tripod and an adapter.

Stake Out Function Icon Stake Out Function

Stake Out Function

The stake out function uses the continuous measurement mode to indicate where to place stakes along a stake-out line. Ideal for any situation where you need to place objects at a consistent interval. The display shows the distance to the next stake out point and the DISTO™ beeps as you approach it.


ENCABEZADO Fila 1 Columna 1: Lorem ipsum dolor sit amet, consectetuer adipiscing elit. ENCABEZADO Fila 1 Columna 2
Fila 3 Columna 1 Fila 3 Columna 2
Fila 4 Columna 1 Fila 4 Columna 2
Fila 5 Columna 1 Fila 5 Columna 2
Fila 6 Columna 1 Fila 6 Columna 2
Fila 7 Columna 1 Fila 7 Columna 2
Fila 8 Columna 1 Fila 8 Columna 2
Fila 9 Columna 1 Fila 9 Columna 2
Fila 10 Columna 1 Fila 10 Columna 2

Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Vestibulum tortor quam, feugiat vitae, ultricies eget, tempor sit amet, ante. Donec eu libero sit amet quam egestas semper. Aenean ultricies mi vitae est. Mauris placerat eleifend leo. Quisque sit amet est et sapien ullamcorper pharetra. Vestibulum erat wisi, condimentum sed, commodo vitae, ornare sit amet, wisi. Aenean fermentum, elit eget tincidunt condimentum, eros ipsum rutrum orci, sagittis tempus lacus enim ac dui. Donec non enim in turpis pulvinar facilisis. Ut felis. Praesent dapibus, neque id cursus faucibus, tortor neque egestas augue, eu vulputate magna eros eu erat. Aliquam erat volutpat. Nam dui mi, tincidunt quis, accumsan porttitor, facilisis luctus, metus