Discontinued LINOs

Written by Tracey Tun on February 22nd, 2018

The Leica L360 is a cross-line laser level with a 360˚ horizontal fan angle and a 180˚ vertical fan angle.

Like a rotating laser, the L360 projects a horizontal line 360° around the tool. Unlike a rotating laser, the beam is bright and constant when used indoors within a 50’ radius, so you can see it with the naked eye.

The L360 vertical line projects 180˚ above and to the front and back of the tool. Use the horizontal and vertical lines together to produce a perfect 90˚ cross line, or toggle between vertical only and horizontal only depending on the application.

Written by Tracey Tun on February 22nd, 2018

The L2G+ is a cross line laser level with a dual fan angle of 180˚. 

It employs a state-of-the-art direct emitting diode that produces a green line with less “beam speckle” than red lasers. The result is a clean, sharp laser line across your work surface. 

Since the green line is easier to see over longer distances, the L2G+ has a 100' range, double that of red lasers. 

Written by Tracey Tun on February 22nd, 2018

The L2P5 is an all in one cross line and point laser tool.

With 180° horizontal and vertical lines, plus four laser points all calibrated to perfect 90° angles, the L2P5 is the Swiss Army knife of laser levels -- one tool for any leveling or point-transfer job. Think of it as a level, chalk line and plumb bob all-in-one.

It is the perfect tool for 90˚ layouts.

A 180° fan angle lets you put it in a corner to layout the whole room.

Written by Tracey Tun on February 22nd, 2018

The Leica L2+ is a cross line laser level with a dual fan angle of 180˚. 

The 180˚ angle allows you put the tool in a corner to layout the whole room.

Use the horizontal and vertical lines together to produce a perfect 90˚ cross line, or toggle between vertical only and horizontal only depending on the application.

The L2+ has a 50' range.

The L2+ self leveling pendulum lets you know your line is out of level by blinking. Once level, the line goes solid. Lock the pendulum to set out angled lines and to protect the mechanism when you aren't using it.

Written by Tracey Tun on February 22nd, 2018

The Leica Lino P5 projects five laser beams, which are exactly at right angles to one another. 

It is the perfect tool for 90˚ layouts and vertical point transfer.

The P5 self leveling pendulum lets you know your tool is out of level by disabling the laser dot. The dot appears once level. Lock the pendulum to set out angled points and to protect the mechanism when you aren't using it.

The lasers and pendulum are housed in a rugged, job site ready body. It is IP54 rated dust-proof and splash protected.

Written by Tracey Tun on February 22nd, 2018

The Leica L2 is a cross line laser level with a dual fan angle of 120˚. 

The L2 is the perfect cross line laser for putting the finishing touches on any home. 

It is light, simple to use, and is the most accurate line laser in its class.

Use the horizontal and vertical lines together to produce a perfect 90˚ cross line, or toggle between vertical only and horizontal only mode depending on the application.

Written by Tracey Tun on February 22nd, 2018

The Leica Lino P3 projects 3 laser beams, which are exactly at right angles to one another. 

Use it for 90˚ layouts and vertical point transfer.

The P3 self leveling pendulum lets you know your tool is out of level by disabling the laser dot. The dot appears once level. Lock the pendulum to set out angled points and to protect the mechanism when you aren't using it.

The lasers and pendulum are housed in a rugged, job site ready body. It is IP54 rated dust-proof and splash protected.